Quady3D

Make a model for printing

AI 3D Print Generator

Create a decorative object from an idea or image. Choose the print size, prepare STL, then check the geometry and supports in your slicer.

Choose a starting point

Prepare a model for your printer

Choose the source you have. Set physical dimensions, inspect thin parts and closed surfaces, then review orientation, supports and layers in your slicer.

Inspect a generated model and its STL

Compare the input and actual output before starting your own.

Cream cake: prompt to STL

Hunyuan3D 3.1 Rapid · 80 mm longest dimension

Original text prompt
A three-tier strawberry cream cake on a porcelain stand, piped cream swirls, fresh strawberries and blueberries, pink glaze drips
Prepared STL geometry

Generated from this prompt, then scaled and exported to STL. Inspect the stand, fruit connections and overhangs before printing.

63.35 × 80 × 62.98 mm (file axes) · 49,972 triangles · Geometry export; review in a slicer before printing.

Check these before printing

A closed shape

Look for holes, disconnected pieces and intersecting surfaces.

Details at print size

Measure narrow stems, raised decorations and thin walls after setting dimensions.

A workable orientation

Review bed contact, overhangs, supports and each layer in your slicer.

From idea to a print test

2. Inspect the model before export

Check the underside, small decorations and connections. For the cake below, review the stand and fruit before choosing the final size.

3. Set dimensions and prepare STL

Choose dimensions in millimeters. STL contains geometry; the colors in a textured preview do not become a multicolor print.

4. Review the sliced result

Open the STL with your printer and material profile. Check thin features, isolated layers, support placement and the first layer before a test print.

Questions before you start

Can I generate a 3D print from text or a photo?

Yes. Describe one object or upload a clear reference to generate a full 3D model. Inspect the result, set its physical size and prepare STL before slicing.

Is the generated model ready to print?

Generation creates a model draft. Printability depends on closed surfaces, wall thickness, size, orientation, material and your slicer settings. Check these before printing.

Does STL keep the colors from the preview?

STL stores surface geometry and has no texture maps. A textured GLB and its converted STL can show the same shape while storing different visual information.

Should I use AI generation or an image relief?

Use AI for an object with front, back and sides. Use a relief for a shallow image on a base. A relief does not reconstruct the hidden side of the photographed object.

Can I use this for a fitted replacement part?

Image-generated meshes do not provide reliable measured dimensions or mechanical tolerances. A fitted part needs dimensioned modeling and a physical fit test.